Keeping your restrooms clean can take a toll on your budget. Between expensive cleaning solutions, complicated equipment, and labor-intensive work, this is one area that needs a technology makeover. Old-school mops and buckets don't do a good job, and many commercial machines are large and use expensive, dangerous chemicals. The best way to reduce the cost of cleaning floors in your restroom is by investing in a frugal new system that still cleans thoroughly. Having your employees mix chemicals and mop the floor is a waste of both time and money. Kaivac's No-Touch Cleaning System eliminates the variables and gets your restroom floor clean and sanitary for less of each.
Cleaning Solutions
Restroom cleaning chemicals vary in strength and cost, but they all have one thing in common: In regular circumstances, most employees simply eyeball how much they need, pouring a splash into the bucket before filling it with water. This can result in a solution not strong enough to actually clean, but more typically the solution ends up stronger than it needs to be. This not only leaves a sticky residue on the floor which attracts soil, but also wastes product, which costs you money. Kaivac's No-Touch Cleaning System measures the cleaning solution and mixes it inside the machine, eliminating any chance of wasting product. And for those areas where any cleaning solution could cause a problem, using the No-Touch system with plain tap water is proven to remove 99.9 percent of the bacteria lurking on a restroom floor, which can reduce the cost of cleaning floors even more.
Labor Costs
Time is money, as the saying goes, and allowing your employees to waste time cleaning restrooms is a drain on your bottom line. Instead of mixing, mopping, and rinsing, you can reduce the cost of cleaning restroom floors by using the No-Touch Cleaning System. Employees spray a cleaning solution over the floor, then use a pressure sprayer to rinse the floors of soil, bacteria, and other harmful substances. This method takes a fraction of the time it takes to clean a floor with a mop and bucket, and does a much better job of cleaning. In addition, once the floor has been completely rinsed, the No-Touch Cleaning System uses a powerful industrial-strength vacuum to remove virtually all the moisture from the floor, leaving it dry and safe to use immediately after cleaning. There's no going back to rinse time and again, and no risk of running off customers because your restroom floor is wet and unusable.
For more information on reducing cleaning costs for your business, click here.
Related Topics
Related Products
![KaiVac 1250 No-Touch Cleaning® System]()
KaiVac 1250 No-Touch Cleaning® SystemWhen it comes to restrooms and other heavily soiled areas, nothing beats Spray-and-Vac cleaning. Kaivac's No-Touch Cleaning systems are built for extreme soil removal, empowering workers to clean hygienically without touching contaminated surfaces. Plus, it cuts labor, chemical and equipment costs.Achieving great, consistent results is easy with these patented systems. Simply apply automatically diluted cleaning solution to fixtures and floors in a low pressure fan spray, and then rinse surfaces and floors with always-fresh, clean water. The built-in power of the indoor pressure washer flushes soils out of grout lines and tight places that mops can't reach. Finally, just vacuum the floor dry -- completely removing soils, moisture and contaminants from all surfaces, grout lines and crevices, leaving the floor virtually dry and soil free.The Kaivac 1250 is ideal for smaller areas. It boasts a 12 gallon fresh water and a 12 gallon recovery tank. The system is powered by a 500 p.s.i. pump and a powerful 3-stage wet/dry vacuum.
![KaiBlooey™ Restroom Cleaner]()
KaiBlooey™ Restroom CleanerKaiBlooey is a high performance restroom cleaner that contains a blend of fast-acting mild acids to de-scale mineral deposits and remove soap scum.KaiBlooey is low-foaming and designed specifically for use with our wet vacuum systems. Too often, users simply apply common cleaning detergents or mop soaps when cleaning and then carelessly vacuum them up. This is like pouring standard dish soap into an automatic dish washer. The result is predictable - extreme foaming, filling the vacuum tank with useless suds and causing premature shut-off. Worse, the excess foam has the potential to damage the vacuum motor. We are so confident in the performance and suitability of our chemicals that we extend our equipment warranty to customers who use them exclusively.Now also available in 8 oz. preportioned packets.
![KaiVac 1750 No-Touch Cleaning® System]()
KaiVac 1750 No-Touch Cleaning® SystemWhen it comes to restrooms and other heavily soiled areas, nothing beats Spray-and-Vac cleaning. Kaivac’s No-Touch Cleaning systems are built for extreme soil removal, empowering workers to clean hygienically without touching contaminated surfaces. Plus, it cuts labor, chemical and equipment costs. Achieving great, consistent results is easy with these patented systems. Simply apply automatically diluted cleaning solution to fixtures and floors in a low pressure fan spray, and then rinse surfaces and floors with always-fresh, clean water. The built-in power of the indoor pressure washer flushes soils out of grout lines and tight places that mops can’t reach. Finally, just vacuum the floor dry -- completely removing soils, moisture and contaminants from all surfaces, grout lines and crevices, leaving the floor virtually dry and soil free.The Kaivac 1750 is perfect for areas large and small. It boasts a 17 gallon fresh water and a 17 gallon recovery tank. The system is powered by a 500 p.s.i. pump and a powerful 3-stage wet/dry vacuum.
![KaiVac 2150 No-Touch Cleaning® System]()
KaiVac 2150 No-Touch Cleaning® SystemWhen it comes to restrooms and other heavily soiled areas, nothing beats Spray-and-Vac cleaning. Kaivac's No-Touch Cleaning systems are built for extreme soil removal, empowering workers to clean hygienically without touching contaminated surfaces. Plus, it cuts labor, chemical and equipment costs. Achieving great, consistent results is easy with these patented systems. Simply apply automatically diluted cleaning solution to fixtures and floors in a low pressure fan spray, and then rinse surfaces and floors with always-fresh, clean water. The built-in power of the indoor pressure washer flushes soils out of grout lines and tight places that mops can't reach. Finally, just vacuum the floor dry -- completely removing soils, moisture and contaminants from all surfaces, grout lines and crevices, leaving the floor virtually dry and soil free. The original No-Touch Cleaning system, the 2150 is designed for larger restrooms and facilities. It has a 21 gallon fresh water and a 21 gallon recovery tank. The system is powered by a 500 p.s.i. pump and a powerful 3-stage wet/dry vacuum.
![OmniFlex™ Spray-and-Vac]()
OmniFlex™ Spray-and-VacWhen it comes to cleaning restrooms and other heavily soiled areas, nothing beats Spray-and-Vac cleaning technology. And the OmniFlex approach offers a cost-effective and easy way to get there. Just purchase a preconfigured 500 psi Spray-and-Vac system, or combine the 500 psi OmniFlex Pump System with the Wet Vacuum and the Trolley-Bucket for the ultimate cleaning experience. Modeled after the original Spray-and-Vac system, Kaivac’s No-Touch Cleaning® machine, the OmniFlex system is built for extreme soil removal. It empowers workers to clean hygienically without touching contaminated surfaces. Plus, it helps cut labor, chemical and equipment costs.
